Merge pull request #1680

921ba8b Windows Installer: Update for Beryllium Bullet 0.13.0.4 (rbrunner7)

LeftPanel.qml

@@ -96,7 +96,7 @@ Rectangle {
         visible: true
         z: 2
         id: column1
-        height: 200
+        height: 210
         anchors.left: parent.left
         anchors.right: parent.right
         anchors.top: parent.top
@@ -111,10 +111,10 @@ Rectangle {
                 anchors.leftMargin: 20
                 anchors.verticalCenter: parent.verticalCenter
                 height: 490 * scaleRatio
-                width: 259 * scaleRatio
+                width: 260 * scaleRatio
 
                 Image {
-                    width: 259; height: 170
+                    width: 260; height: 170
                     fillMode: Image.PreserveAspectFit
                     source: "images/card-background.png"
                 }
@@ -247,19 +247,17 @@ Rectangle {
         anchors.right: parent.right
         anchors.bottom: parent.bottom
         anchors.top: (isMobile)? parent.top : column1.bottom
-        anchors.topMargin: (isMobile)? 0 : 32
         color: "transparent"
 
 
         Flickable {
             id:flicker
-            contentHeight: (progressBar.visible)? menuColumn.height + separator.height + 
-                networkStatus.height + progressBar.height + daemonProgressBar.height : 
-                menuColumn.height + separator.height + networkStatus.height
-            anchors.fill: parent
+            contentHeight: menuColumn.height
+            anchors.top: parent.top
+            anchors.bottom: networkStatus.top
+            width: parent.width
             clip: true
 
-
         Column {
 
             id: menuColumn

README.md

@@ -75,11 +75,11 @@ Packaging for your favorite distribution would be a welcome contribution!
 
   - For Debian distributions (Debian, Ubuntu, Mint, Tails...)
 
-	`sudo apt install build-essential cmake libboost-all-dev miniupnpc libunbound-dev graphviz doxygen libunwind8-dev pkg-config libssl-dev libzmq3-dev libsodium-dev`
+	`sudo apt install build-essential cmake libboost-all-dev miniupnpc libunbound-dev graphviz doxygen libunwind8-dev pkg-config libssl-dev libzmq3-dev libsodium-dev libhidapi-dev`
 
   - For Gentoo
 
-	`sudo emerge app-arch/xz-utils app-doc/doxygen dev-cpp/gtest dev-libs/boost dev-libs/expat dev-libs/openssl dev-util/cmake media-gfx/graphviz net-dns/unbound net-libs/ldns net-libs/miniupnpc net-libs/zeromq sys-libs/libunwind dev-libs/libsodium`
+	`sudo emerge app-arch/xz-utils app-doc/doxygen dev-cpp/gtest dev-libs/boost dev-libs/expat dev-libs/openssl dev-util/cmake media-gfx/graphviz net-dns/unbound net-libs/ldns net-libs/miniupnpc net-libs/zeromq sys-libs/libunwind dev-libs/libsodium dev-libs/hidapi`
 
 2. Install Qt:
 

components/RemoteNodeEdit.qml

@@ -63,7 +63,7 @@ GridLayout {
         return daemonAddr.text.trim() + ":" + daemonPort.text.trim()
     }
 
-    LineEditMulti {
+    LineEdit {
         id: daemonAddr
         Layout.fillWidth: true
         placeholderText: qsTr("Remote Node Hostname / IP") + translationManager.emptyString
@@ -81,7 +81,7 @@ GridLayout {
         onEditingFinished: root.editingFinished()
     }
 
-    LineEditMulti {
+    LineEdit {
         id: daemonPort
         Layout.fillWidth: true
         placeholderText: qsTr("Port") + translationManager.emptyString

get_libwallet_api.sh

@@ -17,7 +17,7 @@ if [ ! -d $MONERO_DIR/src ]; then
 fi
 git submodule update --remote
 git -C $MONERO_DIR fetch
-git -C $MONERO_DIR checkout release-v0.13
+git -C $MONERO_DIR checkout v0.13.0.4
 
 # get monero core tag
 get_tag

installers/windows/Monero.iss

@@ -1,4 +1,4 @@
-; Monero Lithium Luna GUI Wallet Installer for Windows
+; Monero Beryllium Bullet GUI Wallet Installer for Windows
 ; Copyright (c) 2014-2018, The Monero Project
 ; See LICENSE
 
@@ -8,7 +8,7 @@ AppName=Monero GUI Wallet
 ; Thus it's important to keep this stable over releases
 ; With a different "AppName" InnoSetup would treat a mere update as a completely new application and thus mess up
 
-AppVersion=0.12.3.0
+AppVersion=0.13.0.4
 DefaultDirName={pf}\Monero GUI Wallet
 DefaultGroupName=Monero GUI Wallet
 UninstallDisplayIcon={app}\monero-wallet-gui.exe
@@ -22,6 +22,21 @@ LicenseFile=LICENSE
 AppPublisher=The Monero Developer Community
 AppPublisherURL=https://getmonero.org
 
+UsedUserAreasWarning=no
+; The above directive silences the following compiler warning:
+;    Warning: The [Setup] section directive "PrivilegesRequired" is set to "admin" but per-user areas (HKCU,userdocs)
+;    are used by the script. Regardless of the version of Windows, if the installation is administrative then you should
+;    be careful about making any per-user area changes: such changes may not achieve what you are intending.
+; Background info:
+; This installer indeed asks for admin rights so the Monero files can be copied to a place where they have at least
+; a minimum of protection against changes, e.g. by malware, plus it handles things for the currently logged-in user
+; in the registry (GUI wallet per-user options) and for some of the icons. For reasons too complicated to fully explain
+; here this does not work as intended if the installing user does not have admin rights and has to provide the password
+; of a user that does for installing: The settings of the admin user instead of those of the installing user are changed.
+; Short of ripping out that per-user functionality the issue has no suitable solution. Fortunately, this will probably
+; play a role in only in few cases as the first standard user in a Windows installation does have admin rights.
+; So, for the time being, this installer simply disregards this problem.
+
 
 [Languages]
 Name: "en"; MessagesFile: "compiler:Default.isl"
@@ -41,7 +56,7 @@ Name: "en"; MessagesFile: "compiler:Default.isl"
 ; .exe/.dll file possibly with version info).
 ;
 ; This is far more robust than relying on version info or on file dates (flag "comparetimestamp").
-; As of version 0.12.3.0, the Monero .exe files do not carry version info anyway in their .exe headers.
+; As of version 0.13.0.4, the Monero .exe files do not carry version info anyway in their .exe headers.
 ; The only small drawback seems to be somewhat longer update times because each and every file is
 ; copied again, even if already present with correct file date and identical content.
 ;
@@ -51,8 +66,9 @@ Name: "en"; MessagesFile: "compiler:Default.isl"
 Source: "ReadMe.htm"; DestDir: "{app}"; Flags: ignoreversion
 Source: "FinishImage.bmp"; Flags: dontcopy
 
-; Monero GUI wallet
+; Monero GUI wallet exe and guide
 Source: "bin\monero-wallet-gui.exe"; DestDir: "{app}"; Flags: ignoreversion
+Source: "bin\monero-GUI-guide.pdf"; DestDir: "{app}"; Flags: ignoreversion
 
 ; Monero GUI wallet log file
 ; The GUI wallet does not have the "--log-file" command-line option of the CLI wallet and insists to put the .log beside the .exe
@@ -79,6 +95,8 @@ Source: "bin\monero-blockchain-import.exe"; DestDir: "{app}"; Flags: ignoreversi
 Source: "bin\monero-blockchain-blackball.exe"; DestDir: "{app}"; Flags: ignoreversion
 Source: "bin\monero-blockchain-usage.exe"; DestDir: "{app}"; Flags: ignoreversion
 Source: "bin\monero-blockchain-import.exe"; DestDir: "{app}"; Flags: ignoreversion
+Source: "bin\monero-blockchain-ancestry.exe"; DestDir: "{app}"; Flags: ignoreversion
+Source: "bin\monero-blockchain-depth.exe"; DestDir: "{app}"; Flags: ignoreversion
 
 ; was present in 0.10.3.1, not present anymore in 0.11.1.0 and after
 ; Source: "bin\monero-utils-deserialize.exe"; DestDir: "{app}"; Flags: ignoreversion
@@ -230,6 +248,9 @@ Source: "bin\zlib1.dll"; DestDir: "{app}"; Flags: ignoreversion
 ; Stack protection
 Source: "bin\libssp-0.dll"; DestDir: "{app}"; Flags: ignoreversion
 
+; HIDAPI, library for communicating with USB and Bluetooth devices, for hardware wallets
+Source: "bin\libhidapi-0.dll"; DestDir: "{app}"; Flags: ignoreversion
+
 
 [Tasks]
 Name: desktopicon; Description: "Create a &desktop icon"; GroupDescription: "Additional icons:";
@@ -249,7 +270,6 @@ var
 
 procedure InitializeWizard;
 var s: String;
-    width: Integer;
     blockChainDir: String;
 begin
   // Large image for the "Welcome" page, with page reconfigured
@@ -265,7 +285,7 @@ begin
   // Additional wizard page for entering a special blockchain location
   blockChainDefaultDir := ExpandConstant('{commonappdata}\bitmonero');
   s := 'The default folder to store the Monero blockchain is ' + blockChainDefaultDir;
-  s := s + '. As this will need more than 60 GB of free space, you may want to use a folder on a different drive.';
+  s := s + '. As this will need more than 70 GB of free space, you may want to use a folder on a different drive.';
   s := s + ' If yes, specify that folder here.';
 
   BlockChainDirPage := CreateInputDirPage(wpSelectDir,
@@ -381,6 +401,7 @@ end;
 ; Icons in the "Monero GUI Wallet" program group
 ; Windows will almost always display icons in alphabetical order, per level, so specify the text accordingly
 Name: "{group}\GUI Wallet"; Filename: "{app}\monero-wallet-gui.exe"
+Name: "{group}\GUI Wallet Guide"; Filename: "{app}\monero-GUI-guide.pdf"; IconFilename: "{app}\monero-wallet-gui.exe"
 Name: "{group}\Uninstall GUI Wallet"; Filename: "{uninstallexe}"
 
 ; Sub-folder "Utilities";
@@ -405,7 +426,7 @@ Name: "{group}\Utilities\x (Try GUI Wallet Low Graphics Mode)"; Filename: "{app}
 Name: "{group}\Utilities\x (Try Kill Daemon)"; Filename: "Taskkill.exe"; Parameters: "/IM monerod.exe /T /F"
 
 ; Desktop icons, optional with the help of the "Task" section
-Name: "{userdesktop}\GUI Wallet"; Filename: "{app}\monero-wallet-gui.exe"; Tasks: desktopicon
+Name: "{commondesktop}\GUI Wallet"; Filename: "{app}\monero-wallet-gui.exe"; Tasks: desktopicon
 
 
 [Registry]

installers/windows/README.md

@@ -6,7 +6,7 @@ Copyright (c) 2014-2018, The Monero Project
 
 This is a *Inno Setup* script `Monero.iss` plus some related files
 that allows you to build a standalone Windows installer (.exe) for
-the GUI wallet that comes with the Lithium Luna release of Monero.
+the GUI wallet that comes with the Beryllium Bullet release of Monero.
 
 This turns the GUI wallet into a more or less standard Windows program,
 by default installed into a subdirectory of `C:\Program Files`, a
@@ -18,7 +18,7 @@ Monero.
 As the setup script in file [Monero.iss](Monero.iss) has to list every
 single file of the GUI wallet package to install by name,
 this version of the script only works with exactly the GUI wallet
-for Monero release *Lithium Luna* that you find on
+for Monero release *Beryllium Bullet* that you find on
 [the official download page](https://getmonero.org/downloads/).
 
 But of course it will be easy to modify the script for future
@@ -32,13 +32,13 @@ See [LICENSE](LICENSE).
 
 You can only build on Windows, and the result is always a
 Windows .exe file that can act as a standalone installer for the
-Lithium Luna GUI wallet.
+Beryllium Bullet GUI wallet.
 
 The build steps in detail:
 
 1. Install *Inno Setup*. You can get it from [here](http://www.jrsoftware.org/isdl.php)
-2. Get the Inno Setup script plus related files by cloning the whole [monero-core GitHub repository](https://github.com/monero-project/monero-core); you will only need the files in the installer directory `installers\windows` however
-3. The setup script is written to take the GUI wallet files from a subdirectory named `bin`; so create `installers\windows\bin`, get the zip file of the GUI wallet from [here](https://getmonero.org/downloads/), unpack it somewhere, and copy all the files and subdirectories in the `monero-gui-0.12.3.0` directory to this `bin` subdirectory
+2. Get the Inno Setup script plus related files by cloning the whole [monero-gui GitHub repository](https://github.com/monero-project/monero-gui); you will only need the files in the installer directory `installers\windows` however
+3. The setup script is written to take the GUI wallet files from a subdirectory named `bin`; so create `installers\windows\bin`, get the zip file of the GUI wallet from [here](https://getmonero.org/downloads/), unpack it somewhere, and copy all the files and subdirectories in the `monero-gui-0.13.0.4` directory to this `bin` subdirectory
 4. Start Inno Setup, load `Monero.iss` and compile it
 5. The result i.e. the finished installer will be the file `mysetup.exe` in the `installers\windows\Output` subdirectory 
 

installers/windows/ReadMe.htm

@@ -1,13 +1,13 @@
 <html>
 <head>
-<title>Monero Lithium Luna GUI Wallet</title>
+<title>Monero Beryllium Bullet GUI Wallet</title>
 </head>
 
 <body style="font-family: Arial, Helvetica, sans-serif">
-<h1>Monero Lithium Luna GUI Wallet</h1>
+<h1>Monero Beryllium Bullet GUI Wallet</h1>
 
   <p>Copyright (c) 2014-2018, The Monero Project<br>
-  Date: July 27, 2018</p>
+  Date: October 18, 2018</p>
 
 <h2>Preface</h2>
 
@@ -23,7 +23,7 @@
 
 <h2>Content of the Package</h2>
 
-  <p>You just installed the <i>Monero GUI wallet</i> for Windows, release Lithium Luna, more exact version 0.12.3.0.
+  <p>You just installed the <i>Monero GUI wallet</i> for Windows, release Beryllium Bullet, version 0.13.0.4.
   The wallet enables you to send and receive Moneroj in a secure and very private way.
   </p>
 
@@ -61,7 +61,7 @@
   provides the most security and privacy possible for you.</p>
 
   <p>However if your Internet access makes it difficult to run a full node, or if you have simply no room to store
-  the blockchain locally (around 60 GB in summer 2018, and of course growing), you can compromise and try to connect
+  the blockchain locally (around 70 GB in October 2018, and of course growing), you can compromise and try to connect
   to a remote node. One way of finding such a node is checking
   <a href="https://moneroworld.com/#nodes">this page</a>.
   </p>

monero-wallet-gui.pro

@@ -298,6 +298,7 @@ linux {
         -lssl \
         -llmdb \
         -lsodium \
+        -lhidapi-libusb \
         -lcrypto
 
     if(!android) {

pages/Receive.qml

@@ -65,6 +65,8 @@ Rectangle {
     }
 
     function update() {
+        const max_tracking = 3;
+
         if (!appWindow.currentWallet || !trackingEnabled.checked) {
             trackingLineText.text = "";
             trackingModel.clear();
@@ -80,10 +82,10 @@ Rectangle {
         var count = model.rowCount()
         var totalAmount = 0
         var nTransactions = 0
-        var blockchainHeight = 0
+        var blockchainHeight = null
         var txs = []
 
-        for (var i = 0; i < count; ++i) {
+        for (var i = 0; i < count && txs.length < max_tracking; ++i) {
             var idx = model.index(i, 0)
             var isout = model.data(idx, TransactionHistoryModel.TransactionIsOutRole);
             var subaddrAccount = model.data(idx, TransactionHistoryModel.TransactionSubaddrAccountRole);
@@ -103,8 +105,8 @@ Rectangle {
                 if (blockHeight == 0) {
                     in_txpool = true;
                 } else {
-                    if (blockchainHeight == 0)
-                        blockchainHeight = walletManager.blockchainHeight()
+                    if (blockchainHeight == null)
+                        blockchainHeight = appWindow.currentWallet.blockChainHeight()
                     confirmations = blockchainHeight - blockHeight - 1
                     displayAmount = model.data(idx, TransactionHistoryModel.TransactionDisplayAmountRole);
                 }
@@ -130,7 +132,6 @@ Rectangle {
             trackingLineText.text = qsTr("%1 transactions found").arg(nTransactions) + ":" + translationManager.emptyString
         }
 
-        var max_tracking = 3;
         toReceiveSatisfiedLine.text = "";
         var expectedAmount = walletManager.amountFromString(amountToReceiveLine.text)
         if (expectedAmount && expectedAmount != amount) {
@@ -143,11 +144,6 @@ Rectangle {
         }
 
         trackingModel.clear();
-
-        if (txs.length > 3) {
-            txs.length = 3;
-        }
-
         txs.forEach(function(tx){
             trackingModel.append({
                 "amount": tx.amount,